QED XT25 Performance Speaker cable

Márka: QED kábelek

A termék ára: 2.490 Ft helyett 2.240 Ft /fm

Az akció időtartama: 2019. 02. 01. - 2019. 02. 28. vagy amíg a készlet tart! -10%

5 % Törzsvásárlói kedvezmény új regisztráció és hírlevélre feliratkozás esetén!


QED has won more What Hi-fi? Awards than any other single brand and with XT25 this heritage is delivered at a sensible price. Unlike most other manufacturers, QED offer an unlimited lifetime guarantee which means that if your cable ever fails to deliver to its full potential during its lifetime we will replace it free of charge.


In loudspeaker cables high pitched sounds are forced to travel towards the outside of the conductor and so are able to use less and less of the available cross-sectional area as the pitch increases. This is called the “Skin Effect”. It means that for high frequencies the resistance of the cable appears to be much higher than it does for lower pitched sounds. Eddy currents in one conductor can affect the current flowing in an adjacent conductor so that currents flowing in the same direction move away from each other. This “Proximity Effect” also increases resistance as frequency increases. These phenomena have a detrimental effect on the fidelity of the sound you hear. The XT25 variation of QED X-Tube™ Technology solves these problems by creating a hollow tubular conductor geometry out of individual conductor bunches through which each frequency can pass with equal ease when compared to traditional solid or stranded conductors.

Music signals in a loudspeaker cable move back and forth many times every second. The insulating material used to separate the send and return conductors from each other (the dielectric) has to be charged and discharged every time. Not all of the energy stored in the dielectric during each charge cycle is completely returned during each discharge cycle which has a detrimental effect on the fidelity of the sound you hear. That’s why at QED we use low-loss dielectric materials such as Polyethylene (PE) or Teflon™ (PTFE) in preference to cheaper PVC alternatives found in inferior unbranded cables.
Speaker cables need to have a large current carrying capacity. If the electrical resistance of the cable is too large, part of the music signal will be lost, causing a detrimental effect on the fidelity of the sound you hear. To stop this from happening we make the resistance of our speaker cables as small as possible. We do this by using the largest practical cross-sectional area of copper within the size constraints of each cable. In order to squeeze the last drop of performance from the conductors we make sure that there are no impurities in the copper which would defeat the object of making them so large. That’s why we use 99.999% oxygen-free copper exclusively.
Unique proprietary technology and trademarked geometries plus our award winning heritage all combine to create audible sonic improvements when compared to other loudspeaker cables.

•Cross-sectional area: 2.5 mm2
•Wire gauge: 14 AWG
•Jacket outside diameter: 3.96 mm
•Loop inductance: 0.52 μH/m
•Loop resistance: 13.4 mΩ
•Capacitance: 35.0 pF/m
•Dissipation factor @ 10 kHz: 0.0001
•Conductors: 10 x 19/0.13 mm
•Insulation: LDPE jacket with 100% coverage of Aluminium Mylar tape wrap
•Plugs and spades: QED Airloc™ Forte banana plugs

Ajánlott termékek

QED  XT25 Performance Speaker cable2.490 Ft 2.240 Ft / fm

QED XT25 Performance Speaker cable

QED XT 40 Reference Speaker cable3.990 Ft 3.590 Ft / fm

QED XT 40 Reference Speaker cable

QED SIGNATURE X-TUBE 400 C-XT400/509.990 Ft 8.990 Ft / fm